4327 South Fourth Street Chickasha, Oklahoma USA 73018 405-224-0229

Facet Velcon

Replacements for: Banner Peco

Kaydon Murphy

Pleated Media Separator Cartridges   Royal pleated media separator cartridges are designed for high flow and low pressure drop.  Metal end caps are tin plated steel.  Center cores are perforated, spiral formed, plated steel designed to withstand differential pressures up to 75 psid.  Gaskets are Buna N, with other materials available on request.  Our pleated media is a silicone treated, resin impregnated cellulose designed to repel any small coalesced water drops which do not settle by gravity and might try to pass through the separator.     Our pleated media separators are available in a variety of sizes and multiple lengths to replace other manufacturers' separators.

Teflon® Coated Screen Separators     Royal Teflon® coated screen separators are available in a variety of different sizes and configurations to replace other manufacturers' products, or to replace media separators for extended use.     The separator media used in Royal Teflon® separators is 200 mesh stainless steel, coated completely on both sides with Teflon.  Like silicone treated paper, Teflon® is preferentially wet by the hydrocarbon fluid and is hydrophobic, i.e. it repeals water.  The advantage of this type separator is that it can often be washed and reused.  Usually, these separators should be cleaned at the same time coalescers are replaced.  This can result in savings in replacement cost.

Teflon® is a registered trademark of the DuPont Corp.